OPERATING YOUR MACHINE A: BEFORE STARTING THE ENGINE Before starting the engine, check the positions of all levers. 1. Carry out an initial inspection. (For details of the inspection, see CHECK 2. Is lock lever (1) in the LOCK position? BEFORE STARTING.) (a): Free (b): Lock B: TO START THE ENGINE 1. Set fuel control dial (1) at the low idling (MIN) position. Before starting the engine, check that the surrounding area is safe. (a): Low idling 2. Turn the key of starting switch (2) to the START position. 3. When the engine starts, return the key of starting switch (2) to the ON position. (The key will return automatically when released). minutes.
If engine will not start, repeat the starting procedure after about 2 To start engine in cold weather, refer to COLD WEATHER OPERATION. Do not leave the key in START for more than 20 seconds. When using low cetane fuel, starting ability at normal temperatures will be reduced. In such cases, starting will be facilitated by adopting the procedure for low-temperature starting. Special starting ter cartridge with clean fuel and bleed the air from the fuel system before When starting after running out of fuel, fill with fuel, then fill the fuel fil- starting. * For details of bleeding the air, see the section on replacement of the FUEL FILTER.
Starting machine after long period out of use automatic-up warming function as follows. When starting the machine after a long period out of use, first cancel the 2. Turn the fuel control dial to the low idling (MIN) position, then turn it to 1. Turn the starting switch key to the ON position. 3. Turn the fuel control dial back to the low idling (MIN) position, and turn the full position (MAX) and hold it there for 3 seconds. the strating switch key to the START position to start the engine. - 56 -