Komatsu — HANDLING RUBBER PAD SHOE (EXCEPT PC200, 200LC-5 MIGHTY)

HANDLING RUBBER PAD SHOE (EXCEPT PCZOO, 2OOLC-5 MIGHTY) When using rubber shoes, always obey the following precautions for handling. Working environment Use the rubber pad shoes mainly for work on paved road surfaces. If they are used on surfaces which are not paved, the rubber will be cut or damaged, so its durability will drop markedly. In particular, avoid the following operations. Operations on broken pieces on concrete or gravel. Operations on sharp protruding objects such as reinforcing iron or glass (and in particular when traveling over steel sheets driven into the ground). Operations traveling over the shoulder of concrete roads, and operations on rockbed or stony river beds.

Be careful not to let the machine slip when operating on road surfaces covered with water, ice, snow, or gravel. Be particularly careful when unloading the machine. Because of the physical properties of rubber, use the rubber pad shoe in a temperature range of -25°C to 65°C. Operating conditions Operations such as those shown in the diagram where the machine is braced when working, side ditching operations, or operations on slopes, or operations where the machine is frequently steered from side to side, there will be an excessive load on the rubber pad shoe and this will cause damage. If special work equipment is installed, the durability of the rubber pad shoe cannot be guaranteed.

Storage, maintenance Be careful not to get oil or grease on the rubber. If there is any oil or grease on the rubber, wipe it off immediately. Install rubber pad shoe (1) continuously to all links. If it is not installed, it will cause excessive deformation of damage to the rubber. When storing rubber pad shoe (1) for a long time, keep it indoors out of direct sunlight or rain. - 88 -