OPERATION OPERATION ADJUSTMENT G Adjust the seat position at the beginning of each shift or when operators change. G Adjust the seat so that the control levers and switches can be operated freely and easily with the operator’s back against the backrest. ADJUST OPERATOR'S SEAT (A) Fore-and-aft adjustment The seat and the left and right console boxes slide to the front and rear. Move lever (1) to the right, set the operator’s seat at the desired position, then release the lever. Fore-and-aft adjustment : 160 mm (1.63 in) (9 stages) (B) Adjuster reclining angle Pull lever (2) up, adjust the seat back to a position where it is comfortable to operate, then release the lever.
When adjusting, keep your back pushed against the seat back. If your back is not contact with the seat back, it may suddenly spring forward. ADJUST REAR VIEW MIRROR, UNDER MIRROR Adjust the rear view mirror and under mirror so that you can see the area to the rear and front of the operator's cab clearly when sitting in the operator's seat. 3-40 WARNING