MAINTENANCE - Troubleshooting Transmission Reset Procedure In some cases, proper transmission operation can be restored by “resetting” the Transmission Control Module (TCM). Use the following procedure to reset the TCM. 1. Continue to drive the vehicle to a safe location before selecting Neutral ( N ). 5. Wait at least 2 minutes. 6. Restart the engine. 7. If the problem continues, contact a service facility to have the vehicle and transmission system evaluated. mechanical repairs and preventive maintenance services. They have multilingual agents and access to a translation service to ensure quality assistance for customers in any language.
They can’t answer your warranty questions, but can get you in contact with a PACCAR Powertrain distributor who can. The PACCAR Customer Center service is FREE. Roadside Assistance Call toll-free to talk to someone at the PACCAR Customer Center: Kenworth customers call: 1-800- KW-Assist (1-800-592-7747) | Peterbilt customers call: 1-800-4Peterbilt (800-473-8372) Open 24-7-365 days a year. They can help you get roadside assistance. They have a custom mapping system which locates PACCAR Powertrain distributors and Independent Service Providers (ISPs) near you and lists types of services offered, hours of operation and contact information.
They can assist with jump and pull starts, tires, trailers, fines and permits, chains, towing, hazardous clean-up, out of fuel (roadside), NOTE 5 Once Neutral ( N is selected, a gear en- gagement may not be allowed depend- ing on the specific problem. 2. Place the Transmission Driver Interface Device in Neutral ( N . 3. Set the vehicle parking brake. WARNING Apply parking brake and follow vehicle manufacturer parking instructions. Fail- ure to follow these instructions could cause unintended vehicle movement re- sulting in death, serious injury or dam- age to property. 4. Turn the vehicle ignition switch to OFF . 36 Y53-1331 (6/21)