Doosan Mega 500-V (Tier II) — 023-00054E(M500V Tier II sn2000-Up)(023-00054Ecover.fm)

USE CORRECT REPLACEMENT FASTENERS TIGHTENED TO PROPER TORQUE Refer to "General Maintenance" section of Shop Manual for information on tightening torques and recommended assembly compounds and always use correct part. Poor or incorrect fastener connections can dangerously weaken assemblies. SAFETY-CRITICAL PARTS MUST BE REPLACED PERIODICALLY Replace following fire-related components as soon as they begin to show any sign of wear, or at regular periodic intervals, whether or not deterioration is visible: Fuel system flexible hoses, the tank overflow drain hose and the fuel filler cap. Hydraulic system hoses, especially the pump outlet lines and front and rear pump branch hoses.

Keep mounting brackets and hose and cable routing straps tight. Hose routing should have gradual bends. DISPOSE OF ALL PETROLEUM-BASED OILS AND FLUIDS PROPERLY X Physical contact with used motor oil may pose a health risk. Wipe oil from your hands promptly and wash off any remaining residue. Used motor oil is an environmental contaminant and may only be disposed of at approved collection facilities. To prevent pollution of the environment, always do the following; Never dump waste oil in a sewer system, rivers, etc. Figure 31 HAOA470L Always put oil drained from your machine in containers. Never drain oil directly onto the ground.

Obey appropriate laws and regulations when disposing of harmful materials such as oil, fuel, solvent, filters, and batteries. CHECK TIRE PRESSURE AND CONDITION Maintain tire pressure but do not over inflate. Inspect tires and wheels daily. When inflating tires, follow procedures in Maintenance Section, which include using an extension to allow you to avoid standing in front of or over a tire. Do not change a tire unless you have both experience and proper equipment. S0103010K Page 32 Wheel Loader Safety