Komatsu — 3.6.1.2 OPERATIONAL CHECKS

USE OF THE MACHINE 3.6.1. 3 OPERATIONAL CHECKS q All the checks must be carried out by the operator while seated, with fastened safety belt. q If the machine has been stopped after use or in order to carry out maintenance operations, the safety devices may have been inadvertently disconnected; when the operator gets on the cab, he must make sure that all the safety locks of the equipment controls are in the correct position and therefore that the equipment cannot move suddenly and cause accidents. The checks concern: 1 - the locking of the safety bars; 2 - the hand accelerator idling position; 3 - the neutral position of the controls; 4 - the application of the parking brake.

The following check is carried out by turning the ignition key to position « » in order to apply voltage to the control panel and check the functionality of the acoustic alarm, of the fuel level indicator and of the engine oil pressure, generator and prehea- ting warning lights. RWA01960 108 WARNING