USING THE WORK EQUIPMENT 3.13.6.1 RELEASING THE BUCKET 1 - Lower the arm completely and rest the bucket on to the ground in horizontal position. 2 - Stop the engine, release the residual pressures and lock the safety bars. 3 - Rotate the lever (1) to the left to release the coupling pins (2). 4 - Start the machine again and move gradually in reverse, at the same time rotating the tool-holder plate (3) completely forward until releasing it from the upper seat on the bucket (4). 3.13.6.2 COUPLING THE BUCKET 1 - Make sure that the lever (1) is rotated completely to the left and that the coupling pins (2) have moved completely backward.
2 - Incline the tool-holder (3) forward and gradually approach the bucket (4) until centering its upper lip with the edge of the tool-holder cross member. 136