Komatsu — 4.2.5 PARTS SUBJECT TO WEAR THAT PERIODICALLY NEED CHANGING

MAINTENANCE NOTES 4.2.4 NOTES REGARDING LUBRICATION q Lubrication makes the operations carried out with the machine and work equipment smoother, while preventing wear and the noise that may be produced if the articulated joints are dry. Lubrication is to be carried out with grease or oil. q The maintenance operations required for the components that need lubricating are the following: 1 - check of the levels; 2 - oil change; 3 - injection of grease through the grease nipples. q Use only the specified lubricants, according to the ambient temperature.

q Always clean the grease nipples before injecting grease and remove any excess grease after lubrication; this cleaning operation must be performed with extreme care on the revolving parts. q Keep the lubricants at the correct levels; excessive or insufficient quantities are to be avoided. 4.2.5 PARTS SUBJECT TO WEAR THAT PERIODICALLY NEED CHANGING The parts subject to wear such as filters, bucket teeth, etc. must be replaced according to the periodic maintenan- ce intervals prescribed or when they reach the wear limit. The timely change of these parts ensures an economic use of the machine. Use only Komatsu genuine parts, which alone can guarantee excellent quality and interchangeability.

158 PARTICOLARE CODICE DENOMINAZIONE Q.tà FREQUENZA DI SOSTITUZIONE Engine oil filter YM129150-35152 Cartridge 1 EVERY 250 HOURS Hydraulic oil filter 848100086 Cartridge (drain) 1 EVERY 500 HOURS Fuel filter YM119802-55800 Cartridge 1 EVERY 500 HOURS Air cleaner YM129062-12560 YM119005-12571 Main cartridge Safety cartridge 1 1 WHEN REQUIRED WHEN REQUIRED Front bucket 825010053 801015574 801703210 Tooth Screw Nut 6 12 12 — — —