GENERAL PRECAUTIONS 2.2.6 GETTING ON AND OFF THE MACHINE q Do not jump on or off the machine, either when it is at rest and when it is moving. q When getting on or off the machine, always use the appro- priate handles and footboards; get on and off the machine very carefully. q Never hold or rest on the control levers. q Either when getting on and when getting off the machine, always maintain three points of contact (holding or resting points), in order to avoid losing your balance and falling down. RWA37080 q Clean the handles and footboards if they are dirty with oil or grease. Carefully clean the cab floor if it is dirty with oil, grease, mud or rubble.
RWA18670 2.2.7 CHECKING THE REAR-VIEW MIR- RORS (if installed) q Make sure that the rear-view mirrors are clean and correctly directed; the operator must be able to check the area behind the machine with no need to move the trunk with respect to his normal operating position. q If the rear-view mirrors should move or break during the ope- rations, stop the machine immediately and fix or change them. q Working without checking the area behind the machine in- volves the risk of running over persons who have incautiou- sly approached the machine or colliding with fixed obstacles or manoeuvring vehicles. RWA37090 26