SAFETY LOCKS 3 - Locking of the safety device (8) for the inhibition of the equipment control. 3.1.2 EXCAVATOR LOCKS (if installed) IMPORTANT q When travelling on roads, always position the excavator following the longitudinal axis of the vehicle, apply the safety locks and lock the equipment control by shifting the safety device lever to the lock position. The excavator safety locks must be used for travelling on roads and applied by proceeding as follows.
q After folding the bucket completely, apply the lock (1) be- tween boom and arm, the connection lock (2) between boom and sliding plate, the centre pin (3) that locks the sliding plate on the frame, raise the stabilizer supports completely and engage the relevant safety chains (4). RWA37410 1 2 3 4 RWA23280 54