John Deere 6059T — John Deere 6059T User Manual

ARMY TM 9-2815-256-24 AIR FORCE TO 38G1-96-2 MARINE CORPS TM 2815-24/5 3-27.8. Installation. NOTE If engine front plate must be replaced, refer to paragraph 3-42.4. for transferring timing mark. No timing mark will be found on new front plate, a mark must be established and scribed. a. Using center bolt on harmonic balancer, rotate crankshaft until No. 1 piston is at TDC on compression stroke. Insert timing pin (JDE-81-4). b. Make sure roll pin (1, FIGURE 3-109) is installed in pump shaft (2) and that it is not loose in shaft. Replace pump shaft (2) and/or roll pin (1) if damaged. FIGURE 3-109. Fuel Injection Pump Installation c.

Rotate pump shaft until timing marks are aligned, refer to FIGURE 3-110. FIGURE 3-110. Checking Timing Marks d. Lubricate and install new -ring (1, FIGURE 3-73) with clean engine oil onto front face of pump. 3-129