John Deere 6059T — John Deere 6059T User Manual

ARMY TM 9-2815-256-24 AIR FORCE TO 38G1-96-2 MARINE CORPS TM 2815-24/5 3-29.2. Cleaning. Warning Cleaning solvent is flammable and toxic to eyes, skin, and respiratory tract. Skin/eye protection required. Avoid repeated/prolonged contact. Good general ventilation is normally adequate. a. Remove carbon stop seal (6, FIGURE 3-112) and upper sealing washer (7), using a needlenose pliers. Discard seal and washer. FIGURE 3-112. Fuel Injection Nozzle b. Suspend nozzles (so carbon stop seal groove is just covered) in cleaning solvent for a few minutes. CAUTION Do not scrape or disturb teflon coating on nozzle body above carbon stop seal groove.

This coating will become discolored during normal operation, but this is not harmful. Do not use a motor-driven brush to clean nozzle body. c. After soaking, clean tip with a nylon brush. 3-133