ARMY TM 9-2815-256-24 AIR FORCE TO 38G1-96-2 MARINE CORPS TM 2815-24/5 FIGURE 3-161. Location of Cylinder Liner Shim (3) Use deglazer, to deglaze liner and obtain a 45 degree cross hatch pattern, refer to FIGURE 3-163. FIGURE 3-162. Deglazed 45 Degree Cross Hatch Pattern (a) Chuck deglazer in a 1/2 inch slow speed drill. (b) Apply honing oil (MB-30) into cylinder liner. Insert deglazer into cylinder liner. (c) Move deglazer in an up and down direction 10 to 12 complete strokes per cylinder. Move deglazer rapidly enough to obtain a 45 degree crosshatch pattern as shown in FIGURE 3-162. (4) Thoroughly clean cylinder liners after deglazing. 3-209