ARMY TM 9-2815-256-24 AIR FORCE TO 38G1-96-2 MARINE CORPS TM 2815-24/5 FIGURE 3-56. Oil Pressure Test Setup 3-22. OIL BYPASS VALVE ASSEMBLY. 3-22.1. Removal. a. Remove four bolts (4, FIGURE 3-52), two capscrews (3), and six lockwashers (2) from front of oil pan. b. Remove timing gear cover and front plate, refer to paragraphs 3-39.1. and 3-42.1. c. Remove oil bypass valve and spring, refer to FIGURE 3-57. FIGURE 3-57. Oil Bypass Valve Installation 3-22.2. Inspect and Measure. a. Inspect valve and spring for damage. b. Using a spring tester apply 21 to 25 pounds (92 to 112 N) valve spring. Length should be 1.34 inches (34 mm). Replace spring if not within specifications. 3-74