OPERATION Power Mode Pilot Lamp (P Mode) The power mode pilot lamp (4) illuminates when the P mode has been selected. Use the power mode selector switch to select the P mode. For details, see “Power Mode Selector Switch” on page 2-44. Preheating Pilot Lamp The preheating pilot lamp (5) illuminates when the engine preheating electric heater is actuated. In cold weather, when the starting switch is turned to the ON position, this lamp illuminates; when the preheating is completed, it goes out. The preheating time differs dependent on the ambient temperature. For details, see “Starting Engine” on page 2-98. Semi-Auto Digging Pilot Lamp The semi-auto digging pilot lamp (6) is not active.
Auto-Greasing Pilot Lamp (if equipped) The auto-greasing pilot lamp (7) is not used. Joystick Pilot Lamp (if equipped) The joystick pilot lamp (8) illuminates when the joystick ON/OFF switch is at the ON position and the joystick console is tilted to the front. For more details about the joystick steering system, see “JOYSTICK STEERING SYSTEM” on page 5-2. Directional Selector Pilot Lamp The directional selector pilot lamp (9) is not used. 2-26 WA430-6