OPERATION Transmission Cutoff Set Switch Apply the parking brake before adjusting the transmission cutoff position. Use the transmission cutoff set switch (5) to adjust the brake pedal position where the transmission is automatically shifted to neutral. Position (a): ON Cutoff position can be adjusted. When the switch is released, it automatically returns to its original position. For details about adjusting the cutoff position, see “Adjusting Transmission Cutoff Position” on page 2-114. Lamp Switch Use the lamp switch (6) to turn on (illuminate) the front lamps, side clearance lamps, tail lamps, and instrument panel. Position (a): OFF Position (b): Lamps go out.
Side clearance lamps, tail lamps, and instrument panel illuminate. Position (c): Head lamps illuminate in addition to lamps at (b) position. Remark The lamp switch can be operated regardless of the position of the lever. Turn Signal Lever Use the turn signal lever (6) to operate the turn signal lamp. Position (L): LEFT TURN Push lever FORWARD. Position (N): OFF Position (R): RIGHT TURN Remark When the lever is operated, the turn signal pilot lamp also flashes. Pull lever BACK. When the steering wheel is turned back, the lever automatically returns to its original position. If it does not return, return it manually. 2-46 WA430-6