Komatsu — Front Working Lamp Switch

OPERATION Parking Brake Switch Always apply the parking brake when leaving the machine or when parking it. Even if the parking brake switch is turned ON, there is danger until the parking brake pilot lamp illuminates. Keep the brake pedal depressed. Remark Do not use the parking brake switch to apply the brake when traveling, except in emergencies. The parking brake may be damaged, resulting in a serious accident. Stop the machine first and then apply the parking brake. If the parking brake must be used as an emergency brake when the machine is traveling at high speed, ask your Komatsu distributor to carry out inspection to check that there is no damage to the parking brake.

The parking brake switch (9) operates the parking brake. Position (a): ON Parking brake is actuated and the parking brake pilot lamp illuminates. Position (b): OFF The parking brake is released. Remark When the parking brake is applied, the machine will not move off even if the directional lever is operated. If the directional lever is placed at the F or R position with the parking brake still applied, the central warning lamp will light up and the buzzer will sound. Before starting the engine, turn the parking brake switch ON. Front Working Lamp Switch Always turn the working lamp OFF before traveling on public roads.

Use the front working lamp switch (10) to illuminate the front working lamp. Position (a): Working lamp illuminates. Position (b): Working lamp goes out. If position (a) is pressed, the pilot lamp will illuminate and the working lamp circuit will be switched ON. 2-48 WA430-6