Komatsu — Grease Pump

MACHINE FEATURES OPERATION Towing Pin The towing pin is installed to the counterweight and is used when towing the machine. Installing the Towing Pin 1. Insert towing pin (1) into hole (2) in the counterweight. 2. Insert linchpin (3) into the towing pin so that the towing pin does not come out. Removing the Towing Pin 1. Remove linchpin (3) from the towing pin. 2. Remove the towing pin (1) from the counterweight. Grease Pump The grease pump is installed in the holder on the left radiator side of the engine bulkhead at the rear of the machine. 1. Unhook the chain attaching the grease pump to the hook at the bottom of the holder. 2.

Remove the grease pump from the rubber band then remove it from the holder. 3. After using the grease pump, wipe off the grease from its outside and install it in position. 4. When stowing the grease pump, insert it into the holder and fix it with the rubber band. 5. Hitch the tail chain of the grease pump to the hook at the bottom of the holder. WA430-6 2-67