Komatsu — Left Cab Door, Door Open Lock

OPERATION If the door is closed without holding the open lock knob (1) by hand, the plastic part of the lock lever will hit pin (2) at the cab side; this may break the plastic part. Always use your hand to hold the lock knob (1) open when closing the door. Always check that the cab door is locked, both when it is open and when it is closed. Always stop the machine on level ground before opening or closing the door. Avoid opening or closing the door on a slope. There is danger that the operating effort may suddenly change. When opening or closing the door, always use the door handle and knob. Be careful not to get your hands caught by the front pillar or center pillar.

When there is any person inside the cab, always call out a warning before opening or closing the door. Left Cab Door, Door Open Lock When getting in or out of the operator’s compartment, or when operating with the door open, use this lock to hold the door in position. 1. Push the door against catch (1) to lock it in position. 2. When attaching the door in position, lock it firmly to the catch. 3. When getting on or off the machine, hold the handrail on the inside. 4. When closing the door from the operator’s seat, push knob (2) to release the catch. 5. When closing the door after getting off the machine, pull knob (3) to release the catch. 2-70 WA430-6