Komatsu — Measuring Bucket Dump Angle

OPERATION If you are using the multi-function lever, move the work equipment lever to the RAISE position (a). Make sure that the work equipment lever is at the HOLD position (b) once the boom is at maximum height. 6. Use the bucket control lever and tilt the bucket to the DUMP position (c). Make sure that the bucket control lever is at the HOLD position (b) once the bucket tilts. If you are using the optional multi-function lever, move the work equipment lever to the TILT position (e). The work equipment lever must be at the HOLD position (b) once the bucket tilts. 7. Set the work equipment lock lever (4) to the LOCK position (L) so that the work equipment levers (A) cannot move.

2-144 WA430-6