OPERATION Method of Operation Cooling Operation 1. Press main power switch (1) of the air conditioner to turn the power ON. 2. Press fan switch (2) and set the air flow to Hi. 3. Press temperature control switch (3) to set to the desired temperature. 4. Press air conditioner switch (4) to turn the air conditioner switch ON. 5. Press RECIRC/FRESH selector switch (5) to select RECIRC. 6. Press mode selector switch (6) to set the vents to FACE. 7. When the temperature inside the cab decreases, use the temperature control switch and the fan switch to set to the desired temperature. When the AUTO switch is pressed, the temperature and location of the vents are automatically selected.
Remark If the temperature control switch is pressed to set the temperature to the lowest position and the air conditioner is run for a long time with the air flow at Lo, in rare cases, the evaporator may freeze. If the evaporator freezes and no cold air comes out, turn the air conditioner switch OFF; raise the temperature setting; run it for a short time with the air flow at Hi; then turn the air conditioner switch ON again. Heating Operation 1. Press main power switch (1) of the air conditioner to turn the power ON. 2. Press fan switch (2) and set the air flow to Hi. 3. Press temperature control switch (3) to set to the desired temperature. 4.
Press RECIRC/FRESH selector switch (4) to select FRESH. 5. Press mode selector switch (5) to set the vents to FOOT. 6. When the temperature inside the cab increases, use the temperature control switch and the fan switch to set to the desired temperature. When the AUTO switch is pressed, the temperature and location of the vents are automatically selected. Remark Heating is carried out using the engine cooling water; it can be carried out when the cooling water temperature is high. 2-172 WA430-6