Komatsu — PERIODIC REPLACEMENT OF SAFETY CRITICAL PARTS

MAINTENANCE PERIODIC REPLACEMENT OF SAFETY CRITICAL PARTS To ensure safety at all times when operating or driving the machine, the user of the machine must always perform periodic maintenance. In addition, to further improve safety, the parts in the Safety Critical parts list must also be replaced at the specified interval. These parts are particularly closely connected to safety and fire prevention; contact your Komatsu distributor to have them replaced. The material quality of these parts can change as time passes; they are likely to wear out or deteriorate. However, it is difficult to determine the extent of wear or deterioration at the time of periodic maintenance.

You must replace these parts with new ones, regardless of their condition, after a certain period of usage. This is important in order to ensure that these parts maintain their full performance at all times. Should anything abnormal be found on any of these parts, replace it with a new one even if the periodic replacement time for the part has not yet arrived. If any of the hose clamps show deterioration such as deformation or cracking, replace the clamps at the same time as the hoses. Perform checks of the hydraulic hoses which need to be replaced periodically. Tighten all loose clamps and replace defective hoses, as required.

When replacing hoses, always replace O-rings, gaskets, and other such parts at the same time. Have your Komatsu distributor replace the critical parts. 3-22 WA430-6