MAINTENANCE Clean Radiator Fins and Cooler Fins Never open the engine side cover when the engine is running. Stop the engine completely before starting the cleaning operation (compressed air method). If compressed air, pressurized water, or steam hits your body directly or causes dirt to fly, there is danger of personal injury. Always wear safety glasses, dust mask, or other protective equipment. Clean the radiator fins if any mud or dirt is stuck to the radiator. There are two methods of cleaning the radiator fins:
Using the fan reverse function Using compressed air On job sites where it is easy for dirt to stick to the radiator or cooler, turn the cooling fan reverse rotation switch (1) ON to rotate the fan in reverse. This will blow off the dirt and dust stuck to the radiator or cooler, and can extend the cleaning interval. Remark When rotating the fan in reverse, be careful of flying dust and do not let any cloth get caught in the fan. Dust may rise; check that there is no one in the surrounding area when rotating the fan in reverse. Using the Fan Reverse Function Remark Never rotate the fan in reverse by hand when carrying out the operation.
Before operating the fan reverse rotation switch, run the engine at low idle. 1. Set the directional lever to the neutral position (N). 2. Set the parking brake switch to the ON position (A) to apply the parking brake. 3. Run the engine at low idle. 3-42 WA430-6