Komatsu — Check Tire Pressure

MAINTENANCE Check Tire Pressure When inflating a tire, check that no one enters the working area. Use an air chuck which has a clip and can be fixed to the air valve. While inflating the tire, check the inflation pressure occasionally so that it does not rise too high. If the rim is not fitted normally, it may be broken and scattered while the tire is inflated. To ensure safety, place a guard around the tire and do not work in front of the rim; work on the tread side of the tire. Abnormal drop of inflation pressure and abnormal fitting of the rim indicate a problem in the tire or rim. In this case, be sure to ask a tire repair shop to do the repairs.

Be sure to observe the specified inflation pressure. Do not adjust the inflation pressure of the tires immediately after high-speed travel or heavy-duty work. Measure the inflation pressure with a tire pressure gauge while the tires are cool, before starting work. Inflation of Tires Adjust the inflation pressure properly. When inflating a tire, use an air chuck which can be fixed to the air valve of the tire as shown in the graphic. Do not work in front of the rim; work on the tread side of the tire. Remark The optimum inflation pressure differs according to the type of work being performed. For details, see “HANDLING TIRES” on page 2-154.

The proper inflation pressure is shown in the following table. 3-54 WA430-6 Tire Size Inflation Pressure kPa (psi) Standard 23.5-25-16PR Front Tire: 350 (51) Rear Tire: 310 (45)