Check Water Pump MAINTENANCE Check the water pump and its related parts for water leakage. If any abnormality is found, contact your Komatsu distributor for repairs or replacement. Check Starting Motor Contact your Komatsu distributor to have the starting motor checked. If the engine is started frequently, have this inspection carried out every 1,000 hours. Check Air Conditioner Compressor, Adjust As a special tool is required for checking and adjusting the parts, ask your Komatsu distributor for service.
Check for Loose Engine High-Pressure Piping Clamps, Hardening of Rubber Check visually and then use your hand to feel if there are any loose bolts of the mounting clamps and if there is any hardening of the rubber parts for the high-pressure piping between the supply pump and the common rail. If any problem is found, the part must be replaced. Ask your Komatsu distributor to carry out the replacement. Remark If the engine continues to be used when there are loose bolts, hardened rubber, or missing parts, there is a danger of damage or breakage occurring due to vibration and wear at the connections of the high-pressure piping.
Always check that the proper high-pressure piping clamps are correctly installed. WA430-6 3-91