OPTIONS, ATTACHMENTS JOYSTICK STEERING SYSTEM Your machine may be equipped with the joystick steering system. To use the joystick steering safely and efficiently, read the information in this section before using the system. Structure and Function The joystick steering system steers the wheel loader with a lever instead of a steering wheel. The joystick enables steering with small, light movements and helps to reduce operator fatigue. When joystick ON/OFF switch (1) is turned ON, it is possible to operate the steering with the joystick. If the joystick steering system is installed, the steering and transmission control methods can be selected with the joystick ON/OFF switch.
Before turning the joystick ON/OFF switch ON, adjust the position of the joystick console and check that there is no play in the console. See “Adjusting Joystick Console” on page 5-13. When the joystick steering is in use, the joystick pilot lamp on the machine monitor lights up. See “Joystick Pilot Lamp (if equipped)” on page 2-26. The functional difference between steering with the joystick steering system as opposed to the steering wheel is shown in the following table. * Does not shift up above speed range of gearshift lever.
5-2 WA430-6 Selection Operation Using Joystick Operation Using Steering Wheel Joystick ON/OFF Switch ON OFF Steering Steering using joystick (steering with steering wheel is also possible) Steering using steering wheel Transmission Changing direction Operation using directional selector switch at top of joystick Operation using transmission directional lever Transmission auto-shift/ manual shift selector switch Manual Auto (L, H) Manual Auto (L, H) Selection of speed range Speed range selection using shift UP, shift DOWN switches at top of joystick* 1st - 3rd Automatic gearshifting according to travel speed 2nd - 3rd Operation using gearshift lever 1st - 4th Automatic gearshifting according to travel speed 2nd - 4th