Komatsu — Bass Control Knob

Sound System Components OPTIONS, ATTACHMENTS Power Switch/Volume Turn the power switch/volume knob (1) to the right to turn the power ON; you will hear a click. To increase the volume, turn the knob to the right. To decrease the volume, turn the knob to the left. Auto-Store/Preset Scan Button Use the auto-store/preset scan button (2) to actuate the preset scan and auto-store functions. Auto-Store Each time this button is pressed for more than two seconds while in radio reception, the auto-store function automatically starts to search for the desired station within a receivable band, and memorizes the frequency in the preset memory.

During this scanning process, the frequency shown in the right side of the display continues to change. This indicates that each frequency is memorized in auto-store. Remark The auto-store function cannot be used when the channel display is flashing. When the display is flashing, the preset scan function is being used. Preset Scan If this button is pressed for less than 0.5 second while in radio reception, programs from the six preset stations in the same band will be broadcast one after another for five seconds each, starting from No. 1 through 6 stations consecutively. When the desired station is reached, press the button again.

This stops the preset scan tuning process and switches to ordinary broadcasting. The same process will be repeated continuously until the button is pressed again. Bass Control Knob Use the bass control knob (3) to control the low tones. Direction (a): Low tone reduced Direction (b): Low tone emphasized WA430-6 5-23