Komatsu — Fire Caused by Fuel, Oil, Antifreeze, or Window Washer Fluid

Keep Machine Clean SAFETY Keep the machine clean, especially from flammable materials such as trash, grease, oil, or fuel. If you get on or off the machine or carry out inspection and maintenance when the machine is dirty with mud or oil, there is a danger that you will slip and fall. Wipe off any mud or oil from the machine. Always keep the machine clean. If water gets into the electrical system, there is a danger that it will cause malfunctions or misoperation. If there is any accidental operation, there is danger that the machine may move unexpectedly and cause serious personal injury or death.

When washing the machine with water or steam, do not allow the water or steam to come into direct contact with electrical components. Fire and Explosion Prevention Fuel and oil are flammable. Fuel is particularly flammable and can be hazardous. Always observe the following precautions: Keep any open flames, airborne sparks, or burning embers away from flammable fluids. Stop the engine and do not smoke when refueling. Tighten all fuel and oil caps securely. Refueling or adding oil should be done in well-ventilated areas. Clean up any fluid spills. Fire Caused by Fuel, Oil, Antifreeze, or Window Washer Fluid Fuel and oils are particularly flammable and can be hazardous.

Do not bring any flame or fire close to flammable substances such as fuel, oil, antifreeze, or window washer fluid. There is danger that they may catch fire. To prevent fire, always observe the following precautions: Do not smoke or use any flame near fuel or other flammable substances. Stop the engine before adding fuel. Do not leave the machine when adding fuel or oil. Do not spill fuel on overheated surfaces or on parts of the electrical system. Tighten all fuel and oil caps securely. After adding fuel or oil, wipe up any spilled fuel or oil. Always inspect around the entire fuel tank for leaks; clean or repair, if required. Inspect fuel system for leaks.

This includes fuel lines, filters, and injection system. Clean or repair, if required. WA430-6 1-13