Using FNR Switch to Change Between Forward and Reverse OPTIONS, ATTACHMENTS When changing direction between FORWARD and REVERSE, check that the new direction of travel is safe. There is a blind spot behind the machine. Be particularly careful when changing direction to travel in reverse. If the directional selector switch actuation switch is at the ON position and the directional lever is operated to F or R, the machine will travel in forward or reverse according to the operation of the directional lever, regardless of the position of the FNR switch on the head of the multi-function lever. Priority is given to the operation of the directional lever. Be careful when operating the machine.
Do not switch between FORWARD and REVERSE when traveling at high speed. When switching between FORWARD and REVERSE, depress the brake to reduce the travel speed sufficiently, then change the direction of travel. (Maximum speed for changing direction: 10.5 km/h (6.5 mph)) 1. Place the directional lever at the N position. 2. Turn on the directional selector switch on the right side of the switching panel to enable directional selection. Position (a): ON Position (b): OFF The pilot lamp inside the switch and the directional selection pilot lamp on the machine monitor light up, and the FNR switch is activated. WA430-6 5-35