Komatsu — Operation

OPTIONS, ATTACHMENTS BATTERY DISCONNECT SWITCH This option is not available in all areas. The battery disconnect switch cuts the flow of electricity from the battery. It is located beside the engine, on the right side of the machine behind the engine side cover. (A): OFF position The key can be inserted and removed from the switch, and the flow of electricity from the battery is turned on or off. (B): ON position Electricity flows from the battery to the circuits. Always set to the ON position before operating the machine. Operation Except in cases of emergency, do not turn the battery disconnect switch to the OFF position when the engine is running.

Wait for at least one minute after the engine is stopped before turning the switch OFF. Turning the switch OFF when the engine is running may cause failure or abnormality in the electrical system. Before disconnecting the battery terminals, always turn the starting switch to the OFF position, then turn the battery disconnect switch to the OFF position. Be sure to disconnect the ground terminal (negative (-) terminal) first. When connecting the terminals, connect the positive (+) terminal first and the ground (-) terminal last. In the following cases, set the battery disconnect switch to the OFF position:

When machine is put into long-term storage (one month or more) When electrical system is to be repaired When carrying out electric welding When inspecting or handling battery When replacing fuse or slow-blow fuse When the battery disconnect switch is turned OFF, all the electrical systems on the machine stop. The time display on the radio and monitor, the preset memory for radio station reception, and the memory for the load meter data are lost; reset them as necessary. Immediately after the fan has been rotated in reverse, even if the starting switch is turned OFF, the fan reverse rotation solenoid retains electric power for a short time. This protects the hydraulic motor.

Before turning the battery disconnect switch OFF, check first that the fan is completely stopped. If the battery disconnect switch is turned OFF, it can prevent the battery from losing power but the KOMTRAX function also stops. Even if you forget to release the parking brake, the alarm buzzer does not sound. Always be sure to release the parking brake before operating the machine. 5-40 WA430-6