SAFETY Leaving the Machine If the proper procedures are not taken when parking the machine, the machine may suddenly move off by itself. This may lead to serious personal injury or death. The following procedure must be followed when exiting the operator’s cab. Park the machine in a level area. See “Parking the Machine” on page 1-19. Lower the work equipment completely to the ground. For details about work equipment posture, see “Parking the Machine” on page 2-149. Set work equipment lock lever (1) to the LOCK position (L). Set parking brake switch (2) to the ON position (A). Turn the engine OFF. Remove the starting key. Close the operator’s cab door.
Use the key to lock and secure all the equipment locks. This will prevent unauthorized personnel from tampering with your machine. You are responsible for securing your machine. See “Locking the Machine” on page 2-152. Remark Never leave your machine running and unattended, even for a moment. 1-20 WA430-6