Precaution for Warning Tag SAFETY If there is any “DANGER! Do NOT operate!” warning tag displayed, it means that someone is carrying out inspection and maintenance of the machine. If the warning sign is ignored and the machine is operated, there is danger that the person carrying out inspection or maintenance may be caught in the rotating or moving parts and suffer serious personal injury or death. Do not start the engine, touch the levers, or operate any of the controls. ALWAYS follow the warning sign. Checks Before Starting Engine, Adjustments Before starting the engine, perform the following checks and adjustments to confirm that there is no problem with operating the machine.
If this step is not performed properly, there is a danger of serious personal injury to the operator or damage to the machine during operation. Check that the frame lock bar (1) is securely fixed at the FREE position. Clean all windows and mirrors on the machine. Check the angle of the mirrors and adjust all mirrors to prevent any reduction in visibility. Adjust the mirrors so the rear of the machine can clearly be seen from the operator’s seat. See “Adjusting Mirrors” on page 2-95. Remove all dirt from the front lamps, work lamps, and rear combination lamp. Check that they function properly.
Remove mud, dust, and debris accumulated around the movable parts of the accelerator and brake pedals. Check and make sure the pedals work properly. Walk around the machine and make sure that there are no persons or obstacles above, below, or around the machine. Check the coolant level, fuel level, and oil level in the engine oil pan. Check for clogging of the air cleaner. Check for damage to the electric wiring. Make sure that parking brake switch (2) is at the ON position (A). WA430-6 1-27