SAFETY When the bucket is raised and loaded, never make sharp turns or start or stop the machine suddenly. This may cause the machine to tip forward. When handling unstable loads, such as round or cylindrical objects, or piled sheets, if the work equipment is raised high, there is danger that the load may fall on top of the operator’s compartment and cause serious injury or death. When handling unstable loads, be careful not to raise the work equipment too high or tip the bucket back too much. If the work equipment is suddenly lowered or suddenly stopped, the reaction may cause the machine to tip over. Particularly when carrying a load, be sure to operate the work equipment carefully.
Keep the load as close to the ground as possible. When operating in tunnels, under bridges, under electric wires, or other places where the height is limited, be extremely careful not to let the machine body or work equipment hit anything. To prevent accidents caused by hitting other objects, always operate the machine at a speed which is safe for operation, particularly in confined spaces, indoors, and in places where there are other machines. If you are not sure of your clearances, request the aid of another person who can guide or warn you if you get too close to objects. 1-32 WA430-6