. OPERATION MACHINE OPERATIONS AND CONTROLS Rearview Mirrors WARNING 3 - 85 Be sure to adjust the mirrors before st arting work. If they a re not adjusted properly, you cannot s ecure the visibil ity and m ay be injured or may injure someone seriou Mirror (A) e mirror mount so that it is possible to see people at the f the machine. Adjust th e mirror rear left o f the machine. Install t he side view mirror in th e location indicate d in the figure at right . mm (2.4 in) rror securing stay (1) the way the side view mirror es outward to the maximum. (L):
60 mm (2.4 Fix mi stretch es outward to the maxim If the s ide view mirror does not move smoothly w hen adjusting its angle, loosen mirror securing bolt (2) and mirror securing stay bolt (3). Tightening torque of bolt (2): 7.85 - 9.81 Nm (0.8 - 1.0 kgm, 5.8 - 7.2 lbft) its angl e, loosen mirror securing bolt (2) and mirror securing stay bolt (3) Tightening torque of bolt (2): 7. .8 - 1.0 kgm, 5.8 - 7.2 lbft) When adjusting the side view m irror angle, make an adjustment so that the side of the machine comes into view on the mirror as shown in the figure at right. see people a