. MAINTENANCE MAINTENANCE PROCEDURE WASH WASHABLE FLOOR WARNING seat. NOTICE off. 4 - 41 When setting th e machine at an angle, use stron g blocks to stabilize t machine and b e extremely careful whe n carryin g out the o peration. If the control le vers are touched by mis take, the machine m ay sudden move, and this may lead to a serious ac cident.
A lways set t he lock lev securely to the LOCK position before standing up from th e operator monitor and co nnectors inside the op erator's c Never spray wa ter above the pedestal of the op erator's se If any water spl ashes on the surroundi ng equipment, be s ure to wipe With the washab le floor, it is possible to flush o ut the dir t on the ca floor directly wit h water. Washing Washa ble Floor Mat chine on horizontal ground, lower the bucket to the ground, and then stop the engine. 1. Stop the ma 2. When washi a brush. 1. Stop the ma chine on horizontal g round, l ower the bucket to the ground, and then st 2.
When washi ng the floor mat, use a brush to remov e the dus t, or direct the water ont o the mat and wash it with Method of Wash 1. Set the mac see "Method of Setti ng Mach ine at An gle (PAG 2. Swing the u pper structure slowly so that water dra in holes ( or are at a low posit