Komatsu — EVERY 250 HOURS MAINTENANCE

. MAINTENANCE MAINTENANCE PROCEDURE CHECK FAN BELT, ALTERNATOR BELT TENSION, ADJUST 6 kg (58.8 N). 4 - 54 Inspection tion of the belt should be approx. 13 mm (0.5 in) when The deflec tion of the b elt shoul mm (0.5 in) w hen pressed wi th a finger f orce of ap prox. 58.8N (6 k g) at mid-poin t (a) between th e alternato r pulley an d the fan pulley . (A): Altern ator pulley ulley (B): Fan p (C): Crank shaft pulley Adjustmen 1. Loose n bolts and nuts (1), ( ut (4) clockwise to m belt s by approx . 13 mm ( 0.5 in) with appli ed force o f approx. 2. Tighte n bolts and nuts (1), ( 2) and (3) to se cure alternator (5). ning torque ut(1) and (4 39.8 lbf : 33.3 ± 4.9Nm (3.4 ± 0.5kgm, 24.6 ± 3.6 l :

127.4 ± 19.6Nm (13 ± 2kgm, 94.0 ± 14.5 lbft) 5.5kgm, 101. NOTICE Check ea ch pulley for damage, w ear of the V -groov e, and wea r of th e V-belt. In particular, be sur e to check that the V-belt is no touching the bottom o f the V-gro ove. rs, ask the Komatsu distributor in your territory to replace the belts with new ones. ving little allowance for adjustment. belt. heard coming from the belt. ust it after one hour of operation.

In case a ny of the following occu rs, ask the Koma tsu distributor in your territory to replace the belts with new • The fa • A cut o • Slippin n belt has elongated, lea ving little allowan ce fo r adjustme r crack is found on the g or creaking sound is heard coming fro m the belt. When the new V-belt i s set, readj ust it after one ho ur of operation.