Komatsu — EVERY 500 HOURS MAINTENANCE

. MAINTENANCE MAINTENANCE PROCEDURE CHANGE OIL IN ENGINE OIL PAN, REPLACE ENGINE OIL FILTER CARTRIDGE WARNING Parts and oil are at high temperature immediately after the engine is stopped and may cause serious burns. Wait for the oil 3. Open the front engine hood. 4. Using a filter wrench, turn filter cartridge (2) counterclockwise to remove it. REMARK 4 - 61 temperature to g o down before per forming this operat Refill capac ity: 38 liters (10. 04 US gal) the machine and put a container ch the drained oil. Prepare a fi lter wrench over (1) under 1. 2. 1. Remove c under drai n valve (P) to cat ch the drained oil 2.

To prevent getting oil on yo urself, lower the le ver of drain v alve (P) slowly, drain the oil, the n raise the lever t o close the v alve. 5. Clean the filter holder, fill th e new filter cartri dge with clea n oil, coat the thread and pa filter cartri dge with clean oi l (or coat it thinly with grease), then install it to the filter hol Check that the re is no old pack ing stuck to the filt er holder. If t here is any old packing stuc leakage of oil. 6. When inst alling, tighten unt il the packing sur face contact s the seal surface of the filte further 3/4 to 1 turn.