Komatsu — EVERY 2000 HOURS MAINTENANCE

. MAINTENANCE MAINTENANCE PROCEDURE CHANGE OIL IN FINAL DRIVE CASE WARNING 4 - 75 EVERY 2000 HOURS MAINTENANC Maintenance for every 50, 250, 50 0 and 10 00 hours se rvice should be c arried out at the sa me time. The parts and oil are at high temper ature immediately after t he engine is stopped, an d may cause se rious burns. Wait fo r the temperature to g o down before start ing the op eration. If there is still pr essure remaining in side the c ase, the oil or plug may fly Loosen the plug slowly to release th e pressur Refill capacity: each 12 liters (3. 17 US ga Prepare a han 1. Set the TOP mark at the top, w ith the T OP mark an d plu g (P) perpendicula r to the ground su rface. he oil.

le and drain the oil. 2. Set a contain er under plug (P) to catch t he oil. 3. Remove plug s (P) and (F) with the hand le and drain the oil. REMARK Check the O-ring s in the plugs for damage. If necessar with new ones. 4. Tighten plug (P). gh the hole of plug (F). 5. Add oil throu gh the hole of plu 6. When oil beg ins to overflow fro m the plu g (F) hole, i nstall plug (F). rque of plugs (P) and (F): (7 ± 1 kgm, 50.6 ± 7.2 lbft) Tightening to rque of plugs (P) 68.6 ± 9.8 Nm (7 ± 1 kgm, 50.6 ± 7.2 lbf REMARK There are two plu gs (F). Add oil thro ugh the o ne easier to fill oi l and through which no internal gears ar e to be se en.