. OPERATION DETAILED CONTROLS AND GAUGES Gauges and Meter 3 - 19 Engine Coolant Temperat ure Gauge ngine coolant temperature. , indicator should be in the black range nters the red range (A) - (B) during prevention system is actuated. Gauge (8) indicates the e During normal operations (A) - (C). If indicator e operations, the overheat (A) - (B): Red range (A) - (C): Black range The overheat prevention system acts as follows. ngine water temperature monitor (D) ghts up red. ngine speed is reduced to low idling, ngine water temperature monitor (D) Red range position (A) : E li Red range position (B) :
E e li s The overheat preventio nitor (D) ghts up red, and the alarm buzzer ounds at same time. n system remains actuated until the ack range. d, if the indicator is at position (C), monitor (D) lights up white. warming-up operation. For details, see 3-95)". indicator returns to the bl When the engine is starte d, if the indicator is at position ( engine water temperature monitor (D) lights up white. In this case, carry out the "Engine Warm Up (PAGE Fuel Gauge mount of fuel in the fuel tank. icator should be in the black range.
Gauge (9) indicates the a During operations, the ind icator should be in the black ra If indicator enters red ra nge (A) during operations, ther e is less than 110 liters (29.06 US gal) of fuel remaining in the tan k, check and add fuel. (A) - (B): Red range (A) - (C): Black range REMARK When the indicator reach es red range (B), there is less than 80 el remaining. he red range (B), fuel level monitor (D) liters (21.14 US gal) of fu When the indicator is in t lights up red. The correct fuel level ma y not be displayed for a short ti me when the starting switch is turn ed ON, but this is not an abnor mality.