Komatsu — Operations Before Starting Engine

OPERATION MACHINE OPERATIONS AND CONTROLS 3. Insert the key in starting switch (2), turn the key to the ON position, then carry out the following checks. 4. The buzzer sounds for approx. 1 second, then the monitors and gauges light up for approx. 3 seconds. q Preheating monitor (3) q Charge monitor (4) q Engine oil pressure monitor (5) q Engine water temperature caution lamp (6) q Fuel level caution lamp (7) q Travel speed boost monitor (8) If a monitor or gauge does not light up or the buzzer does not sound, there is probably a blown fuse or disconnection in the monitor, so contact your Komatsu distributor for repairs. After approx. 3 seconds, only the following monitors stay lighted up.

The other monitors go out. q Charge monitor (4) q Engine oil pressure monitor (5) 5. Press lamp switch (9) and check that the working lamp lights up. If it does not light up, there is probably a blown bulb or disconnection, so contact your Komatsu distributor for repairs. 6. Press horn switch (10) to confirm that the horn will sound. 3-53