Komatsu — Starting Engine in Cold Weather

MACHINE OPERATIONS AND CONTROLS OPERATION 1. Check the safety lock lever (1) is at the LOCK position (L). If the safety lock lever is in the FREE position (F), the engine does not start. REMARK For machines equipped with a cab, there is only a safety lock lever on the left. 2. Pull fuel control lever (2) fully from the low idling position (position A) to the full speed position (position B). 3. Hold the key in starting switch (3) at the HEAT position and check that the buzzer sounds and preheating monitor (4) lights up, and that preheating monitor (4) flashes after that. After approx.

18 seconds, the buzzer sounds and preheat­ ing monitor (4) goes out to indicate that the preheating is completed. REMARK The monitor and gauge also light up when the key is at the HEAT position, but this does not indicate any abnormality. 4. When pre-heating monitor (4) goes off, turn the key in stat­ ing switch (3) to the START position to start the engine. 3-56