Komatsu — After stop engine

OPERATION MACHINE OPERATIONS AND CONTROLS 5. Set safety lock lever (3) in the LOCK position (L). REMARK For machines equipped with a cab, there is only a safety lock lever on the left. MACHINE INSPECTION AFTER DAILY WORK 3 Before stop engine 3 Check the engine water temperature (1), engine oil pressure (2), and fuel level (3) on the machine monitor. After stop engine 3 1. Walk around the machine and check the work equipment, machine exterior, and undercarriage, also check for any leakage of oil or coolant. If any abnormalities are found, repair them. 2. Fill the fuel tank. 3. Check the engine compartment for paper and debris. Clean out any paper and debris to avoid a fire hazard. 4.

Remove any mud affixed to the undercarriage. 3-83