ATTACHMENTS AND OPTIONS ATTACHMENTS AND OPTIONS - GENERAL INFORAMTION ATTACHMENT INSTALLATION 6 Long work equipment or heavy work equipment cause the machine to have poor stability, so there is danger of the machine losing its balance and tipping over when travel ing down steep hills or when swinging on slopes. Never do any of the following. They are extremely danger ous.
Traveling downhill with the work equipment raised Traveling across slopes Swinging upper structure on slopes If heavy-load work equipment is installed, there will be excessive overrun when swinging (the distance from oper ating to stop the swing to the point where the swing stops completely), so there is danger of mistaking the distance and hitting other objects. Allow a margin to the stopping point when operating. In addition, the hydraulic drift (the gradual downward movement caused by the weight of the work equipment when the work equipment is stopped in a raised condition) will also increase.
If the correct procedure is not used when installing the boom and arm, it may lead to serious damage. Please consult your Komatsu distributor. When long work equipment is installed, the working range will suddenly become larger, so there is danger of mistak ing the distance and hitting other objects. Allow an ample margin between the work equipment and surrounding obstacles when operating. 6-3 WARNING