SAFETY INFORMATION SAFETY LEAVING OPERATOR'S SEAT WITH LOCK q Before standing up from the operator's seat (such as when opening or closing the front window or roof window, or when removing or installing the bottom window, or when adjusting the operator's seat), lower the work equipment completely to the ground, set safety lock lever (1) securely to the LOCK position (L), then stop the engine. If you acci dentally touch the levers when they are not locked, there is a hazard that the machine may suddenly move and cause serious injury or property damage.
q When leaving the machine, always lower the work equip ment and blade completely to the ground, set safety lock lever (1) to LOCK position (L), then stop the engine. Use the key to lock all the equipment. Always remove the key, take it with you, and keep it in the specified place. 2-12