SAFETY INFORMATION SAFETY FALLING OBJECTS, FLYING OBJECTS AND INTRUDING OBJECTS PREVENTION On jobsites where there is a hazard that falling objects, flying objects, or intruding objects may hit or enter the operator's cab, consider the operating conditions and install the necessary guards to protect the operator. q When carrying out demolition or breaker operations, install a front guard and use a laminated coating sheet on the front glass. q When working in mines or quarries where there is a hazard of falling rock, install FOPS (Falling Objects Protective Structure) and a front guard, and use a laminated coating sheet on the front glass.
q When carrying out the above operations, always close the front window. In addition, always ensure that by standers are a safe distance away and are not in hazard from falling or flying objects. q The above recommendations assume that the conditions are for standard operations, but it may be necessary to add additional guards according to the operating conditions on the jobsite. Always contact your Komatsu distributor for advice. CAUTIONS RELATED TO ROPS (ROLLOVER PROTECTION SYSTEM) q ROPS is a structure designed to protect an operator who is wearing a seatbelt if the machine should roll over. It supports the weight of the machine when it rolls over and also absorbs the impact energy.
q If ROPS is modified, its strength may be reduced. When modifying, consult your Komatsu distributor. q If ROPS is damaged or deformed by falling objects or by rolling over, its strength will be reduced and it will not be able to fulfill its function properly. In such cases, always Komatsu contact your distributor for advice of the method of repair. Even if ROPS is installed, always fasten your seat belt properly when operating the machine. If you do not use your fasten your seat belt properly, it cannot display its effect. Prohibition of removal of ROPS canopy q Never remove the ROPS canopy under any circumstances.
If the machine should roll over, this will lead to to serious personal injury. q When removing the ROPS canopy for transportation or any other reason, always consult your Komatsu dis tributor beforehand. ATTACHMENT INSTALLATION q When installing optional parts or attachments, there may be problems with safety or legal restrictions. There fore contact your Komatsu distributor for advice. q Any injuries, accidents, or product failures resulting from the use of unauthorized attachments or parts will not be the responsibility of Komatsu.
q When installing and using optional attachments, read the instruction manual for the attachment, and the gen eral information related to attachments in this manual. 2-16