SAFETY SAFETY MACHINE OPERATION SAFETY RULES FOR TRAVELING q It is dangerous to drive too fast, or to start suddenly, stop suddenly, or to turn sharply. q When traveling on flat ground, keep the work equipment 40 to 50 cm (16 to 20 in) high above the ground. q When traveling on rough ground, travel at low speed and do not operate the steering suddenly. There is danger that the machine may turn over. The work equipment may hit the ground surface and cause the machine to lose its bal ance, or may damage the machine or structures in the area. q Avoid traveling over obstacles when possible.
If the machine has to travel over an obstacle, keep the work equipment close to the ground and travel at low speed. Never travel over obstacles which make the machine tilt strongly to one side. q When traveling or carrying out operations, always keep a safe distance from people, structures, or other machines to avoid coming into contact with them. q When passing over bridges or structures, check first that the structure is strong enough to support the weight of the machine. When traveling on public roads, check first with the relevant authorities and follow their instructions.
q When operating in tunnels, under bridges, under electric wires, or other places where the height is limited, operate slowly and be extremely careful not to let the work equip ment hit anything. q For machines with the canopy specification, when the work equipment is operated to the maximum left boom swing with the work equipment in the minimum swing posture, soil may spill from the bucket and fall on to the floor. Be extremely careful when operating in this posture. 2-23