Komatsu — SAFETY MAINTENANCE INFORMATION

SAFETY SAFETY MAINTENANCE INFORMATION CAUTIONS FOR OPENING (TILTING) FLOOR When opening (tilting) the cab or floor, see Section “METHOD OF OPENING (TILTING) FLOOR (3-32)“ for details. Precautions when parking machine q Park the machine on firm, level ground. q Select a place where there is no hazard of falling rocks or landslides, or of flooding if the land is low. q Lower the work equipment and blade completely to the ground. Precautions when opening or closing q Do not open the floor when the machine is on a slope or when there is strong wind. This may lead to serious per­ sonal injury.

q Never open the floor when the engine is running, or when the door on the cab specification machine is open, or when the safety lock lever is at the FREE position. This is extremely dangerous. q Immediately after the engine is stopped, the parts and oil are at a high temperature, and will cause burns. Check that the temperature in the engine room has gone down before starting the operation to open the floor. q Do not get on or off the operator's seat during the floor opening operation. You may fall and suffer serious per­ sonal injury. 2-35