To use an external device simply connect the device via the auxiliary input jack. Front auxiliary mode will not be available if no device is connected to the auxiliary input jack on the front of the receiver. If your connected device supports this feature, it can be used as an audio source input to the radio, allowing you to enjoy the music files stored on your phone. This feature is recommended for use with the default device player. Functionality cannot be warranted, when a third party player is used in the connected device. The radio can be out of synchrony if the user alters or command the player within the phone. 1. Pair device to Smart display.
Refer to Bluetooth Settings for further information. 2. To control and browse the selected media source refer to sections Media Sources and Media Audio Control Soft key for further information. Note 1: Repeat and random functions will only be shown if the cell phone supports these feature. Note 2: The contacts shown on the radio display will depend on the information received by the radio from the phone device used. Note 3 : Functions may differ depending on the phone. Please consult your cell phone user guide regarding how to enable it. Note 4: Some phones will make the radio display BT AUDIO PAUSE while audio is available.
This is normal on phones that do not have full compatibility with this radio Bluetooth remote control commands. Note 5: Some devices will disconnect Bluetooth when a transfer is performed. The DEA600 is not safety product. The cameras and the rear auxiliary inputs are provided for driver conveniences only. The purpose of this stereo input is to connect the audio output of an external source or a sound channel from a safety system. When the source is an external Navigation audio input the system detects activation of the 19 | P a g e Playing Bluetooth Audio: Ownerґs Manual DEA600 Radio Bluetooth Player Rear Auxiliary Notes:
If the disc is not playing correctly, for any other reason, try a known good CD. Bit rates: 32, 40, 48, 56, 64, 80, 96, 112, 124, 160, 192, 224, 256, 320 kbps for MPEG-1 Audio Layer 3. Sampling frequencies: 32, 44.1 and 48 kHz for MPEG-1 Audio Layer 3. Maximum number of folders: Eight folders with 255 files per folder. Recorded on a CD-R or CD-RW with a maximum capacity of 700 MB. Root Directory: The root directory is treated as a folder. All files contained directly under the root directory are accessed prior to any root directory folders. Empty Folders:
If a root directory or folder is empty or contains only folders, the player advances to the next folder in the file structure that contains a compressed audio file. The empty folder(s) are not displayed or numbered. Front auxiliary input is active when a jack connector is inserted. After the connector is inserted, the mode is changed to Front Aux mode, unless any mode with a higher priority is active (I.E. phone call, video, reverse mute….). This operation is not available while the System is in standby power mode. In front auxiliary mode, you can play an external device such as an iPod ® or MP3 player via the auxiliary input jack on the front of the receiver.
The disc is dirty, scratched, wet, or upside down. The air is very humid. Try the disc again later. There was a problem while burning the disc. If any error continues, contact your dealer. M3U and PLS playlist versions supported. The label is caught in the CD player. Maximum of 1,000 files on a disc. The disc is bent. Special Considerations Front Auxiliary For MP3 Files: