Delphi DEA600 Radio — DEA6XX Owners Manual v5.2

1. Remove the device, after that pair and connect the device. Refer to DELETE ONE OR DELETE ALL DEVICES and to Pairing a Bluetooth Device and Connecting a Device sections. 2. Make sure the device is turned on. 3. Make sure the Bluetooth adapter on your radio is enabled, Refer to Bluetooth Enabling/Disabling section. 4. The device might be out of range. Try moving it closer. Try one of the following actions: 1. Make sure that you selected the correct device to be connected to. For example, you might have two or more devices previously paired or connected, so make sure you selected the right device. 2. Some devices require a passkey before they can be connected to the radio. 3.

Probably an incorrect passkey was typed or the time limit expired for typing the passkey. Refer to Connecting a Device section. 4. If the device is close to other devices that use radio frequencies (such as microwave ovens, cordless phones, remote controls for electronics or lighting, or 802.11 wireless networks), those devices might be creating interference. Try moving the device that isn't working farther away from the other devices. 1. Verify the device is paired and connected. Refer to sections: Pairing a Bluetooth Device and Connecting a Device. 2. Make sure BT AUDIO Source is selected in the source list menu. Refer to Media Sources section. 3.

Adjust the Volume on the radio by rotating the knob. 4. Verify that your device is not paused. 5. Make sure your device has music files. The radio requires up to 15 seconds to wake up, so if you wake up the radio using the RSA and the radio is in sleep mode, the RSA will show "no-link" 55 | P a g e The device and my radio can't communicate Device music cannot be heard Rear Seat Audio (RSA) The RSA shows no link Ownerґs Manual DEA600 Radio Increase the Seek Sensitivity (see Seek Sensitivity section for details). Out of the operation range, Operation temperature of the CD is -20°C to 55°C (-4°F to 131°F). Allow the vehicleґs interior temperature to increase or decrease (depending on the case).

If the iPod is supported, reset the iPod and re-connect again (see iPod section for details). Out of the operation range, Operation temperature of the iPod player is - 20°C to 85°C (-4°F to 185°F). Allow the vehicleґs interior temperature to be in human supportable range. My radio doesn't recognize my Bluetooth enabled device iPod does not play or there is no sound Tips and Troubleshooting Verify that the iPod is supported. CD Insertion is not possible Eject the CD and remove it. The iPod has not been recognized. Unable to tune stations You are in a weak signal area. CD player not functioning A CD is already in the CD player. Try one of the following actions:

iPod not functioning Bluetooth Radio iPod CD