Komatsu — CHECK BEFORE STARTING ENGINE, ADJUST

. OPERATION OPERATION OPERATION CHECK BEFORE STARTING ENGINE, ADJUST WARNING system. If any leak is found, repair it. 4. Check for leakage from fuel line. Check that there is no leakage of fuel or damage to the hoses and tubes. If any problem is found, carry out repairs. 6. Check the undercarriage (track, sprocket, idler, guard) for damage, wear, loose bolts, or leakage of oil from rollers. If any problem is found, repair it. 7. Check for problems in handrails, steps, loose bolts. If any problem is found, repair it. Tighten any loose bolts.

3 - 69 WALK-AROUND CHECK Before starting the engine, walk aro und the machine and look at the underside of c hassis for a nything u nusual l ike loose bolts and nuts, leakage of fu hydraulic system. el, oil and coolant. Also check the condition of the work equipment and the nd collection of dust at places that reach high temperature. the Also check for loose wiring, play, a nd collection of dust at places that reach high t emperature Leakage of oil or fuel, or accumulati on of flammable material around high temperature p arts, such as the engin e muffle r or turbocharger, may cause fire. Check carefully, and if any abnormali ty is found, repair it or contact your Komatsu distributor.

ty is found, repair it or contact your Komatsu distrib Do not get on or off the machine from the rear. Using this position is dangerous because it is easy to slip and yo u cannot be seen from the operator's compartme nt. Always use the handrail and step at the side whe n getting on o r off the m achine. If the machine is at an angle, repos Perform the following inspections a nd cleaning every day before starting engine fo r the day's 1. Check for damage, wear, play i n work equipment, cylinders, linkage, and hose s. Check that there are no cracks, any problem is found, repair it. excessive wear, or play in the work equipmen t, cylinders, linkage, o r hoses . If 2.

Remove dirt and debris from ar ound the engine, battery, and radiator. Check for dirt accumulated arou etc.) around the battery, engin flammable materials are found, nd the engine and radiator. Also check for flamm able materi al (dry lea ves, twigs, e muffler, turbocharger, or other high temperature engine parts. If any dirt or remove them. 3. Checking engine for leak of wat gine oil, leak of water from the cooling system and leak of air from t he suction 5. Check for oil leakage of oil from power train case, final drive case, hydraulic ta nk, hoses, and joints Check that there is no oil leaka Check for leakage of oil from th ge.

If any problem is found, repair the place wh ere the oil i s leaking. e undercover. Check the ground for traces of o il leakage.